CROSS-PLATFORM SOLUTIONS
PROPRIETARY FLUID IDENTIFICATION NUMBER
PST™ sensors have a very unique capability not found in any other sensors available on the market today. They can identify liquids and potentially gases (future) inside a closed container, pipe, or vessel without coming in contact (non-intrusively) with the liquid or gas. The value of this capability is high due to the reduction in installation time and costs vs other technologies which must be in contact (intrusive) with the process liquid or gas. Products which require intrusive installation also cost downtime for installation and this is not always very easy to schedule downtime for large equipment, vessels, tanks, or pipelines when they are used for daily operations which are revenue generating. Secondly, this requires all components of an intrusive sensor to be chemically compatible with the process liquid or gas. It further creates potential leak points which in turn create environmental concerns.
TRANSMIX-ID™
Model MK1000: Minimizes the Transmix loss by Identifying the exact interface point when 100% of the leading fuel becomes 99.9% of the leading fuel and 0.1% of the lagging fuel.
TRANSMISSION
ALARM-ID™
Model EC1000: Provides an alarm point when the identified liquid passes the sensor level either up or down. ​
STORAGE
MANIFEST-ID™
Provides necessary information to your control system to be able to integrate the liquid identity to the shipment as a confirming manifest for your customer.
TRANSMISSION
PORTABLE-ID™
Model PA600: Portable sensors capable of diagnosing process problems inside of closed containers or pipes both on land and subsea operations. VIEW SPEC SHEET
GENERAL PURPOSE
LEVEL-ID™
Model LL1000: Provides the liquid level in a tank as accurate as 1/100th of an inch as well as providing confirmation of what liquid is inside the tank.
STORAGE
INTERFACE-ID™
Provides companies using common (shared) pipes with the needed information that helps them make the right decisions regarding when one product has completed flowing at 100% and the second product following in that same process line starts as a mixture.
TRANSMISSION
FLOW-ID™
Identifies liquid specification of the flowing product inside the pipe and volume over time can be calculated for total flow and flowrate.
TRANSMISSION
SUBSEA-ID™
Provides services to sub-sea oil pipeline operators to identify restrictions in flow, potential leaks, plugs in the pipeline, and other operational issues that arise.
GENERAL PURPOSE
INVOICE-ID™
The primary measurement sensor providing liquid identification as well as density and flow volume of product transferred from one owner to another.
TRANSMISSION
GATEKEEPER-ID™
Provides record of all incoming and outgoing flow (bi-directional), density, temperature and product identification so your operations can run mass balance reports for all assets equipped with this sensor.
TRANSMISSION
STORAGE
FLOW-ID™
Provides record of all incoming and outgoing flow (bi-directional), density, temperature and product identification so your operations can run mass balance reports for all assets equipped with this sensor.
TRANSMISSION
VOLUME-ID™
Model VM1000: Provides record of all incoming and outgoing flow (bi-directional), density, temperature and product identification so your operations can run mass balance reports for all assets equipped with this sensor.
TANK-ID™
Confirm liquids being shipped across our borders are what is contained on the shipping manifest.
STORAGE
FLUID-ID™
Model FD1000: Provides record of all incoming and outgoing flow (bi-directional), density, temperature and product identification so your operations can run mass balance reports for all assets equipped with this sensor.
TRANSMISSION
TRANSMISSION
PIPE-ID™
Model PL1000: Provides record of all incoming and outgoing flow (bi-directional), density, temperature and product identification so your operations can run mass balance reports for all assets equipped with this sensor.
STORAGE
