top of page

CROSS-PLATFORM SOLUTIONS

PROPRIETARY FLUID IDENTIFICATION NUMBER

FluID_Logo_CLOUD.png

PST™ sensors have a very unique capability not found in any other sensors available on the market today.  They can identify liquids and potentially gases (future) inside a closed container, pipe, or vessel without coming in contact (non-intrusively) with the liquid or gas.  The value of this capability is high due to the reduction in installation time and costs vs other technologies which must be in contact (intrusive) with the process liquid or gas.  Products which require intrusive installation also cost downtime for installation and this is not always very easy to schedule downtime for large equipment, vessels, tanks, or pipelines when they are used for daily operations which are revenue generating.  Secondly, this requires all components of an intrusive sensor to be chemically compatible with the process liquid or gas.  It further creates potential leak points which in turn create environmental concerns. 

TRANSMIX-ID™

PST_NAMECONV_TRANSMIXID_WHT.png

Minimizes the Transmix loss by Identifying the exact interface point when 100% of the leading fuel becomes 99.9% of the leading fuel and 0.1% of the lagging fuel. 

VIEW PRODUCT   |   VIEW SPEC SHEET

PST_NAMECONV_ALARMID_WHT.png

ALARM-ID™

Provides an alarm point when the identified liquid passes the sensor level either up or down. ​

VIEW PRODUCT   |   VIEW SPEC SHEET

PST_NAMECONV_MANIFESTID_WHT.png

MANIFEST-ID™

Provides necessary information to your control system to be able to integrate the liquid identity to the shipment as a confirming manifest for your customer.

PST_NAMECONV_PORTABLEID_WHT.png

PORTABLE-ID™

Portable sensors capable of diagnosing process problems inside of closed containers or pipes both on land and subsea operations.    VIEW SPEC SHEET

PST_NAMECONV_LEVELID_WHT.png

LEVEL-ID™

Provides the liquid level in a tank as accurate as 1/100th of an inch as well as providing confirmation of what liquid is inside the tank.

PST_NAMECONV_FLOWID_WHT.png

FLOW-ID™

Identifies liquid specification of the flowing product inside the pipe and volume over time can be calculated for total flow and flowrate.

PST_NAMECONV_INTERFACEID_EDIT_WHT.png

INTERFACE-ID™

Provides companies using common (shared) pipes with the needed information that helps them make the right decisions regarding when one product has completed flowing at 100% and the second product following in that same process line starts as a mixture.

PST_NAMECONV_INVOICEID_WHT.png

INVOICE-ID™

The primary measurement sensor providing liquid identification as well as density and flow volume of product transferred from one owner to another. 

PST_NAMECONV_GATEKEEPERID_WHT.png

GATEKEEPER-ID™

Provides record of all incoming and outgoing flow (bi-directional), density,  temperature and product identification so your operations can run mass balance reports for all assets equipped with this sensor.

PST_NAMECONV_SUBSEAID_WHT.png

SUBSEA-ID™

Provides services to sub-sea oil pipeline operators to identify restrictions in flow, potential leaks, plugs in the pipeline, and other operational issues that arise.

PST_NAMECONV_GOVERNMENTID_WHT.png

GOVERNMENT-ID™

Confirm liquids being shipped across our borders are what is contained on the shipping manifest. 

PST_HorizontalLogo_DKGRY.png

Research Coordinator

info@perceptivesensors.com

​

bottom of page